G960U REV 3 8.0 SPRINT UNLOCK DONE

M

megabox

New member
My SamTool Username: samtool1642

1 - Connect device in download mode with sim card
2 - Flash engModem: https://drive.google.com/drive/folders/12leutTKrFVFLDu_nI7izmIC5denTB1b9 (select Modemend G960USQU.tar)
3 - Open SAMTool, click "Read Security" (no need Write Security)
4 - DONE!

LOG:
Start Reading Security Task on 19/06/2019 15:55:45 -03:00
ADBSN: 3843374A33573398
MODEL NAME: SM-G960U
BOOTLOADER: G960USQS3BRK3
PDA VERSION: G960USQS3BRK3
MODEM VERSION: G960USQU3ARJ1
CSC VERSION: G960USQS3BRK3
MODEM BOARD: SDM845
ANDROID VERSION: 8.0.0
Carrier: SPR
SIM STATE: CARD_IO_ERROR
Connection Config: DIAG,ACM,ADB
Warranty Bit: 0
Connecting to COM49...OK
Model Name: SM-G960U
IMEI: 353306090861331
SN: R28K317T7HP
UID: 988BCE3843374A335733
SWVER: G960USQS3BRK3/G960USQS3BRK3/G960USQU3ARJ1/G960USQU1ARB7/G960UOYN3BRK3
Restarting debug level high......OK
Waiting for device connect......OK
Searching for SAMSUNG Diagnostic Port......OK
Phone is Detected on COM50
Init Diag Port......OK
Reading authentication data......OK
Writing simlock data......OK
Cheking security data......OK
Repair simlock data......OK
Verify lock status: UNLOCKED!
You phone is unlocked no need to Write Security
Total time take: 00:01:47, finished on 19/06/2019 15:57:33 -03:00
 

Attachments

H

hasitha96

New member
Start Reading Security Task on 7/9/2019 12:24:15 PM -05:00
ADBSN: 4754324D544D3098
MODEL NAME: SM-G960U
BOOTLOADER: FA80_G960USQU3ARG2
PDA VERSION: FA80_G960USQU3ARG2
MODEM VERSION: G960USQU3ARJ1
CSC VERSION: FA80_G960USQU3ARG2
MODEM BOARD: SDM845
ANDROID VERSION: 8.0.0
CPU: QCOM
SIM STATE: READY
Connection Config: MTP,ADB
Warranty Bit: 0
Connecting to COM108...OK
Model Name: SM-G960U
IMEI: 354018093809469
SN: R28K526XCNP
UID: 988B9B4754324D544D30
SWVER: FA80_G960USQU3ARG2/FA80_G960USQU3ARG2/G960USQU3ARJ1/FA80_G960USQU3ARG2
This model is not supported
Total time take: 00:00:06, finished on 7/9/2019 12:24:22 PM -05:00
 
I

Instaunlocker

New member
megabox said:
My SamTool Username: samtool1642

1 - Connect device in download mode with sim card
2 - Flash engModem: https://drive.google.com/drive/folders/12leutTKrFVFLDu_nI7izmIC5denTB1b9 (select Modemend G960USQU.tar)
3 - Open SAMTool, click "Read Security" (no need Write Security)
4 - DONE!

LOG:
Start Reading Security Task on 19/06/2019 15:55:45 -03:00
ADBSN: 3843374A33573398
MODEL NAME: SM-G960U
BOOTLOADER: G960USQS3BRK3
PDA VERSION: G960USQS3BRK3
MODEM VERSION: G960USQU3ARJ1
CSC VERSION: G960USQS3BRK3
MODEM BOARD: SDM845
ANDROID VERSION: 8.0.0
Carrier: SPR
SIM STATE: CARD_IO_ERROR
Connection Config: DIAG,ACM,ADB
Warranty Bit: 0
Connecting to COM49...OK
Model Name: SM-G960U
IMEI: 353306090861331
SN: R28K317T7HP
UID: 988BCE3843374A335733
SWVER: G960USQS3BRK3/G960USQS3BRK3/G960USQU3ARJ1/G960USQU1ARB7/G960UOYN3BRK3
Restarting debug level high......OK
Waiting for device connect......OK
Searching for SAMSUNG Diagnostic Port......OK
Phone is Detected on COM50
Init Diag Port......OK
Reading authentication data......OK
Writing simlock data......OK
Cheking security data......OK
Repair simlock data......OK
Verify lock status: UNLOCKED!
You phone is unlocked no need to Write Security
Total time take: 00:01:47, finished on 19/06/2019 15:57:33 -03:00
Click to expand...
Hey boss how do you know when to flash eng modem?
 
You must log in or register to reply here.
Top