J7 PERX SM-J727P BIT 6

kingunlockpr

kingunlockpr

Member
-ENABLE USB DEBUGGING
-CHOOSE Q1 TO READ SECURITY
-CHOOSE Q2 TO WRITE SEC AND DONE
-NO NEED FLASH MODEM

HERE IS THE LOG!!


Code: 
Start Read Security Phone Task on 11/1/2019 5:55:47 PM -07:00
Balance: 25 Credit(s)
ADBSN: 66E00765
MODEL NAME: SM-J727P
BOOTLOADER: J727PVPU6BSF2
PDA VERSION: J727PVPU6BSF2
MODEM VERSION: J727PVPU6BSF2
CSC VERSION: J727PVPU6BSF2
MODEM BOARD: MSM8953
ANDROID VERSION: 8.1.0
CARRIER: BST
SALE COUNTRY: USA
CPU: QCOM
SIM STATE: READY
SIM CONFIG: SS
USB CONFIG: MTP,ADB
Warranty Bit: 0
USB Modem Connection Detected!
Model Name: SM-J727P
IMEI: 355743092417266
SN: 00000000000
UID: C30066E0076515
SWVER: J727PVPU6BSF2/J727PVPU6BSF2/J727PVPU6BSF2/J727PSPT6BSF2
Initializing Applet......OK
Reading MODEM security info......
CARRIER LOCK: BST
IMEI: 35574309241726
MSLADDR: R28K32QV7D
Security Status: PASS
Switching to Upload Mode......OK
Searching Upload Mode Port......
Phone Found on Port: COM4
Connecting to COM4......OK
Reading Device Security Area......OK
Exiting Upload Mode......OK
Security readed, verifying.....OK
Searching security found
Read Security Successful!
Balance: 23 Credit(s)
Total time take: 00:03:30, finished on 11/1/2019 5:59:19 PM -07:00

Start Write Security Phone Task on 11/1/2019 6:00:17 PM -07:00
Balance: 23 Credit(s)
ADBSN: 66E00765
MODEL NAME: SM-J727P
BOOTLOADER: J727PVPU6BSF2
PDA VERSION: J727PVPU6BSF2
MODEM VERSION: J727PVPU6BSF2
CSC VERSION: J727PVPU6BSF2
MODEM BOARD: MSM8953
ANDROID VERSION: 8.1.0
CARRIER: BST
SALE COUNTRY: USA
CPU: QCOM
SIM STATE: READY
SIM CONFIG: SS
USB CONFIG: MTP,ADB
Warranty Bit: 0
USB Modem Connection Detected!
Model Name: SM-J727P
IMEI: 355743092417266
SN: 00000000000
UID: C30066E0076515
SWVER: J727PVPU6BSF2/J727PVPU6BSF2/J727PVPU6BSF2/J727PSPT6BSF2
Searching security data found
Initializing Applet......OK
Reading MODEM security info......
CARRIER LOCK: BST
IMEI: 35574309241726
MSLADDR: R28K32QV7D
Initializing Applet......OK
Resetting MSL......OK
Waiting for device disconnect......OK
Waiting for device connect......OK
Initializing Applet......OK
Writing Mslcode......OK
Calculating AKSEED......OK
Writing IMEI: 355743092417266......OK
Writing IMEI Signature......OK
Unlocking......OK
Verifying Security Data......PASS
Restarting cp debug level low......OK
Unlock Successful!
Balance: 23 Credit(s)
Total time take: 00:02:14, finished on 11/1/2019 6:02:33 PM -07:00
 
K

Krankin

New member
kingunlockpr said:
-ENABLE USB DEBUGGING
-CHOOSE Q1 TO READ SECURITY
-CHOOSE Q2 TO WRITE SEC AND DONE
-NO NEED FLASH MODEM

HERE IS THE LOG!!


Code: 
Start Read Security Phone Task on 11/1/2019 5:55:47 PM -07:00
Balance: 25 Credit(s)
ADBSN: 66E00765
MODEL NAME: SM-J727P
BOOTLOADER: J727PVPU6BSF2
PDA VERSION: J727PVPU6BSF2
MODEM VERSION: J727PVPU6BSF2
CSC VERSION: J727PVPU6BSF2
MODEM BOARD: MSM8953
ANDROID VERSION: 8.1.0
CARRIER: BST
SALE COUNTRY: USA
CPU: QCOM
SIM STATE: READY
SIM CONFIG: SS
USB CONFIG: MTP,ADB
Warranty Bit: 0
USB Modem Connection Detected!
Model Name: SM-J727P
IMEI: 355743092417266
SN: 00000000000
UID: C30066E0076515
SWVER: J727PVPU6BSF2/J727PVPU6BSF2/J727PVPU6BSF2/J727PSPT6BSF2
Initializing Applet......OK
Reading MODEM security info......
CARRIER LOCK: BST
IMEI: 35574309241726
MSLADDR: R28K32QV7D
Security Status: PASS
Switching to Upload Mode......OK
Searching Upload Mode Port......
Phone Found on Port: COM4
Connecting to COM4......OK
Reading Device Security Area......OK
Exiting Upload Mode......OK
Security readed, verifying.....OK
Searching security found
Read Security Successful!
Balance: 23 Credit(s)
Total time take: 00:03:30, finished on 11/1/2019 5:59:19 PM -07:00

Start Write Security Phone Task on 11/1/2019 6:00:17 PM -07:00
Balance: 23 Credit(s)
ADBSN: 66E00765
MODEL NAME: SM-J727P
BOOTLOADER: J727PVPU6BSF2
PDA VERSION: J727PVPU6BSF2
MODEM VERSION: J727PVPU6BSF2
CSC VERSION: J727PVPU6BSF2
MODEM BOARD: MSM8953
ANDROID VERSION: 8.1.0
CARRIER: BST
SALE COUNTRY: USA
CPU: QCOM
SIM STATE: READY
SIM CONFIG: SS
USB CONFIG: MTP,ADB
Warranty Bit: 0
USB Modem Connection Detected!
Model Name: SM-J727P
IMEI: 355743092417266
SN: 00000000000
UID: C30066E0076515
SWVER: J727PVPU6BSF2/J727PVPU6BSF2/J727PVPU6BSF2/J727PSPT6BSF2
Searching security data found
Initializing Applet......OK
Reading MODEM security info......
CARRIER LOCK: BST
IMEI: 35574309241726
MSLADDR: R28K32QV7D
Initializing Applet......OK
Resetting MSL......OK
Waiting for device disconnect......OK
Waiting for device connect......OK
Initializing Applet......OK
Writing Mslcode......OK
Calculating AKSEED......OK
Writing IMEI: 355743092417266......OK
Writing IMEI Signature......OK
Unlocking......OK
Verifying Security Data......PASS
Restarting cp debug level low......OK
Unlock Successful!
Balance: 23 Credit(s)
Total time take: 00:02:14, finished on 11/1/2019 6:02:33 PM -07:00
Click to expand...
 
R

Rinneganneko

New member
I'm getting this:


Reading Device Security Area......OK
Exiting Upload Mode......OK
Security readed, verifying.....FAIL!
Searching security not found
Enable 'Deep Security Calculate' option and try again!
Balance: 14 Credit(s)

And even using the deep one still get the same problem, IMEI is ok, certi state ok, mipi succes, fresh firmware and everything.
 
N

Noviero23

New member
Reading Device Security Area......OK
Exiting Upload Mode......OK
Security readed, verifying.....FAIL!
Searching security not found
Enable 'Deep Security Calculate' option and try again!

i have the same problem, i try 7 times And is the same
 
F

fuegomorado

New member
ADBSN: 50CFE037
MODEL NAME: SM-J727P
BOOTLOADER: J727PVPU6BSF2
PDA VERSION: J727PVPU6BSF2
MODEM VERSION: J727PVPU6BSF2
CSC VERSION: J727PVPU6BSF2
MODEM BOARD: MSM8953
ANDROID VERSION: 8.1.0
CARRIER: SPR
SALE COUNTRY: USA
CPU: QCOM
SIM STATE: ABSENT
SIM CONFIG: SS
USB CONFIG: DIAG,ACM,ADB
Warranty Bit: 0
Connecting to COM31 ......OK
Reading Device Info......OK
MODEL NAME: SM-J727P
IMEI: 355xxxxxxxxxxxxxx
SN: 00000000000
UID: C30050CFE037C4

Void is 0. I will try a few more times. If not works. This is a lie. I download this virtual box only for J727P model. Better start using Samkey then
 
You must log in or register to reply here.
Top