Rinneganneko
New member
Hi guys, i'm new on your tool and forum, i purchase com crd to check the service and stay if it works for me, now i;m trying to unlock a J727P U5, but i keep getting stuck at an error saying: "Reading Device Security Area......" and just stays there forever, i have tried just a couple small things, like changing port number, dm+modem+adb, Factory rest the device, using another simcard during the procces, but still i get the same problem, i'll show you the ful log:
Start Read Security Phone Task on 1/31/2020 3:14:11 PM -06:00
Balance: 14 Credit(s)
ADBSN: F0A4AAC8
MODEL NAME: SM-J727P
BOOTLOADER: J727PVPS5BSA3
PDA VERSION: J727PVPS5BSA3
MODEM VERSION: J727PVPS5BSA3
CSC VERSION: J727PVPS5BSA3
MODEM BOARD: MSM8953
ANDROID VERSION: 8.1.0
CARRIER: BST
SALE COUNTRY: USA
CPU: QCOM
SIM STATE: CARD_IO_ERROR
SIM CONFIG: SS
USB CONFIG: DIAG,ACM,ADB
Warranty Bit: 0
Connecting to COM242 ......OK
Reading Device Info......OK
MODEL NAME: SM-J727P
IMEI: 355743090442480
SN: 00000000000
UID: C300F0A4AAC8C4
SWVER: J727PVPS5BSA3/J727PVPS5BSA3/J727PVPS5BSA3/J727PSPT5BSA3
Initializing Applet......OK
Reading MODEM security info......
CARRIER LOCK: BST
IMEI: 35xxxxxxxxxxx
MSLADDR: R28K149G6A
Security Status: PASS
Switching to Upload Mode......OK
Waiting for device to Upload Mode......OK
Searching Upload Mode Port......
Phone Found on Port: COM54
Connecting to COM54......OK
Reading Device Security Area......
And just stays there forever, any ideas?.
Start Read Security Phone Task on 1/31/2020 3:14:11 PM -06:00
Balance: 14 Credit(s)
ADBSN: F0A4AAC8
MODEL NAME: SM-J727P
BOOTLOADER: J727PVPS5BSA3
PDA VERSION: J727PVPS5BSA3
MODEM VERSION: J727PVPS5BSA3
CSC VERSION: J727PVPS5BSA3
MODEM BOARD: MSM8953
ANDROID VERSION: 8.1.0
CARRIER: BST
SALE COUNTRY: USA
CPU: QCOM
SIM STATE: CARD_IO_ERROR
SIM CONFIG: SS
USB CONFIG: DIAG,ACM,ADB
Warranty Bit: 0
Connecting to COM242 ......OK
Reading Device Info......OK
MODEL NAME: SM-J727P
IMEI: 355743090442480
SN: 00000000000
UID: C300F0A4AAC8C4
SWVER: J727PVPS5BSA3/J727PVPS5BSA3/J727PVPS5BSA3/J727PSPT5BSA3
Initializing Applet......OK
Reading MODEM security info......
CARRIER LOCK: BST
IMEI: 35xxxxxxxxxxx
MSLADDR: R28K149G6A
Security Status: PASS
Switching to Upload Mode......OK
Waiting for device to Upload Mode......OK
Searching Upload Mode Port......
Phone Found on Port: COM54
Connecting to COM54......OK
Reading Device Security Area......
And just stays there forever, any ideas?.
Last edited: